For anyone running diesel plant, generators, agricultural machinery or commercial vehicles, few fuel problems cause as much disruption as diesel bug. It blocks filters, damages injectors and can leave a machine stranded on site with little warning. The good news is that it is largely preventable with the right filtration and good fuel housekeeping.

In this post, we’ll explain what diesel bug is, the symptoms to look out for, why some equipment is more at risk than others and how to treat and prevent it.

What is diesel bug?

Diesel bug is the common name for microbial contamination in diesel fuel. Bacteria, fungi and yeasts enter the tank through air vents, fuel deliveries and condensation. They cannot survive in the fuel alone, so they settle where water and fuel meet at the bottom of the tank and feed on the hydrocarbons. As they multiply they form a dark, slimy biomass that clings to tank walls and gets drawn into the fuel system.

It has become more common over the past decade. UK road diesel can contain up to 7% biodiesel (FAME), which holds more water than pure mineral diesel and breaks down more easily. That gives microbes both the moisture and the food they need to grow. Fuel also tends to sit in storage for longer on sites where machines are used intermittently.

Diesel bug symptoms

The signs of diesel bug usually build gradually before causing a breakdown. Look out for:

  • Fuel filters blocking well before their service interval
  • Black, brown or green slime in filter housings or the water separator bowl
  • Dark or cloudy fuel in samples drawn from the tank
  • A sour or rotten smell from the tank
  • Loss of power, rough running or stalling under load
  • Hard starting, especially after a machine has stood idle
  • Corrosion inside steel tanks and fuel lines

Repeatedly blocked filters are often the first warning. If a machine keeps clogging fuel filters, the problem is likely to be in the tank, so fitting another filter on its own will not solve it.

Water in diesel fuel symptoms

Water is the root cause of diesel bug, so it is worth knowing the signs of water contamination before microbes take hold. These include misfiring, spluttering, white exhaust smoke and poor starting. Water also causes corrosion and wear in high pressure fuel pumps and injectors, where tolerances in modern common rail systems are measured in microns.

Why plant, generators and stored fuel are most at risk

Any diesel engine can be affected, but some equipment faces a much higher risk.

Machines with long idle periods. Plant that stands for weeks over winter or between contracts gives water time to settle and microbes time to grow. Partly empty tanks hold more air and temperature swings between day and night create condensation on the inside of the tank.

On-site bowsers and bulk storage tanks. Refilling stirs up sediment and spreads any contamination through the fuel. Many tanks sit outdoors with breathers and seals that are rarely checked.

Fleets that changed fuel after the red diesel rules. Since April 2022 most construction businesses have no longer been able to use red diesel and many moved to white diesel or HVO. White diesel contains FAME, which raises the risk of water uptake. HVO is more resistant but can still support microbial growth if water gets into the tank.

Standby generators. Backup generators may only run for a few hours a year, so fuel can sit in the tank for months or even years between top-ups.

Agricultural machinery. Tractors and harvesters often stand idle outside the working season, with farm fuel tanks exposed to the same condensation and contamination risks. Our range of agricultural filters covers the major tractor and harvester brands.

How fuel water separators protect your engine

A fuel water separator is the first line of defence against water in diesel. Its filter media causes tiny water droplets to merge into larger ones, which are heavy enough to drop out of the fuel and collect in a bowl at the base of the filter. The water can then be drained off through a valve before it reaches the pump and injectors.

On most heavy-duty engines the separator acts as the primary filter on the suction side, removing water and larger particles. A finer secondary filter then protects the injection system. Primary filters are typically rated somewhere in the 10 to 30 micron range while secondary filters are often between 2 and 10 microns. Our guide to micron ratings for vehicle filters explains what those numbers mean in practice.

When choosing a fuel water separator filter, check:

  • The flow rate suits the engine output
  • The micron rating matches the OEM specification
  • It has a clear bowl and drain valve so water can be spotted and removed easily
  • A heated option is available if the machine works in cold conditions
  • It is compatible with biodiesel blends and HVO if you run them

We supply fuel filters and water separator elements from heavy-duty manufacturers including Fleetguard, Baldwin and Donaldson, with cross-referencing available for most OEM part numbers.

Diesel bug treatment

Once diesel bug is established, filters alone will not clear it. Treatment usually involves several steps:

  1. Test the fuel. Diesel bug test kits give a quick on-site result, while laboratory testing confirms the type and level of contamination.
  2. Drain off the water. Remove free water from the bottom of the tank and from every separator bowl.
  3. Dose with a biocide. A biocide kills the microbes, but the dead biomass stays in the tank and will still block filters. Products sold as diesel bug treatments work in different ways, so check whether an additive is a biocide or a dispersant before relying on it.
  4. Clean or polish the tank. Fuel polishing circulates the fuel through filtration to remove sludge and water. Heavily contaminated tanks may need professional cleaning.
  5. Replace all fuel filters. Fit new primary and secondary filters after treatment and expect to change them again sooner than normal as remaining debris works through the system.

How to prevent diesel bug

Prevention costs far less than a contaminated fuel system. A few habits make the biggest difference:

  • Drain fuel water separators regularly and check the bowl as part of daily walk-around checks on plant
  • Keep tanks topped up, especially before machines stand idle
  • Use the oldest fuel first and avoid storing more than you need for long periods
  • Inspect tank breathers, seals and filler caps for damage
  • Draw off tank bottoms periodically to remove water and sediment
  • Test stored fuel at regular intervals, particularly before winter
  • Change fuel filters at the recommended interval, or sooner if fuel quality is in doubt

If you are laying up plant for winter, it is also a good time to check the rest of the filtration. Hydraulic filters, oil filters and coolant filters all protect expensive components and are easier to replace during planned downtime than after a failure on site.

Diesel bug FAQs

Can diesel bug clear up on its own?

No. As long as there is water in the tank the microbes will keep growing. The water needs removing and the contamination treating before the problem will stop.

Does HVO get diesel bug?

HVO is less prone to diesel bug because it contains no FAME and absorbs very little water. However, if water gets into the tank through condensation or a poor seal, microbes can still grow at the fuel and water boundary. The same separators and housekeeping apply.

How often should I drain a fuel water separator?

On plant in daily use, check the bowl every day and drain it whenever water is visible. Always follow the equipment manufacturer’s guidance for service intervals.

Can diesel bug damage injectors?

Yes. Sludge and water reaching the injection system can cause wear and corrosion in high pressure pumps and injectors, which are among the most expensive components to replace.

Find the right fuel filtration for your equipment

Filter Services supplies heavy-duty filtration to businesses across construction, agriculture, transport and industry. If you need help matching a fuel filter or water separator to your machine, or want to set up a regular supply for your fleet, get in touch with our team.